10 Best Dehumidifiers of 2026

Choosing a dehumidifier

A useful dehumidifier must do more than collect water. It should sense and hold a selected relative humidity, ideally within the EPA-recommended 30%–50% range, without excessively drying the room. A separate hygrometer is still useful because several products publish a control range but no sensor-accuracy figure; one supplied product states ±5% accuracy. Look for a documented setpoint range, automatic mode, restart behavior, and an operating-temperature range that matches the space. Auto-defrost matters in cool basements, but a defrost claim does not by itself prove effective moisture removal at low temperatures.

Capacity claims need especially careful reading. Headlines such as “80 pints,” “100 pints,” or “4,500 square feet” often describe maximum removal at hot, extremely humid conditions such as 95°F and 90% or 95% relative humidity. They are not interchangeable with the current DOE test basis. A substantiated product has an exact-model entry in the EPA ENERGY STAR Product Finder or the U.S. Department of Energy Compliance Certification Management System, with a comparable standardized pints-per-day figure and integrated energy factor in liters per kilowatt-hour. The supplied products show how large the gap can be: some advertised 50- to 80-pint machines have standardized capacities around 22.5–24.93 pints per day, while another is listed at 49.93 pints per day. Room-size claims also depend on temperature, moisture load, leakage, airflow, layout, and runtime, so they should not be treated as precise sizing results.

For safety, check the exact model not merely the brand for an independent North American listing in UL Solutions Product iQ, Intertek’s ETL directory, or the CSA product database. ENERGY STAR confirms energy performance, not electrical or fire safety. Also look for full-tank shutoff, a secure drain connection, an inspectable tank, washable or replaceable filters, and clear cleaning instructions. A small tank can fill quickly when the daily removal capacity is much higher, making gravity drainage and hose routing important. Reliable support, warranty terms, replacement tanks or filters, and other service parts are better signs of a maintainable appliance than a warranty headline alone.

Across the supplied reviews, recurring cautions include unverified electrical-safety listings, unsupported large-room claims, undisclosed humidity accuracy, and gravity drains that must slope downward. Many units are specified only to about 41°F–45°F, making them unsuitable for colder spaces. Compressor products using R-32 or R290 refrigerant are flammable and require appropriate clearance and qualified sealed-system service; one review also raised concern about a product whose stated R290 use was not identified as acceptable for standalone residential dehumidifiers in the cited EPA list. No product should substitute for fixing leaks, standing water, flooding, or existing mold.

Integrity

Full reviews

#1 - Best Overall

AEOCKY 80 Pint Smart Dehumidifier

Buyer Score 98/100Integrity Score 80/100AEOCKY

Overview

This is a portable compressor dehumidifier for household rooms, with a removable tank and a supplied hose, garden-hose adapter, washable pre-filter, timer, child lock, and continuous-drain option. Its control panel allows a selected humidity from 40% to 80%, while Auto mode targets 45% to 55%, according to the manufacturer manual. The most important independently confirmed figure is not the advertised 80-pint maximum. EPA ENERGY STAR records this product under its Rhea-001 additional model information, with 24.5 pints per day at the current standardized test method, 1.86 L/kWh efficiency, 285 kWh estimated annual energy use, and ENERGY STAR Most Efficient status. AEOCKY states that 80 pints per day is measured at 95°F and 95% RH, conditions far more severe than the standardized rating.

What works

• EPA ENERGY STAR independently confirms the exact product family, its 24.5-pint standardized capacity, 1.86 L/kWh efficiency, and Most Efficient status.
• The manual provides usable moisture controls, including a 40% to 80% setpoint range and an Auto setting maintained between 45% and 55%.
• Automatic defrost, automatic restart, and a stated 5°C to 35°C operating range are documented in the manufacturer manual.
• The unit stops and alarms when the tank is full, supports hose drainage, and has a removable washable pre-filter with specific cleaning instructions.

What does not

• The 4,500 square foot catalog claim conflicts with AEOCKY's current 5,500 square foot product page. Neither figure states building layout, moisture load, or test conditions.
• The comparable certified capacity is 24.5 pints per day. The 80-pint figure is a manufacturer-stated maximum at 95°F and 95% RH, not the DOE rating.
• AEOCKY does not publish a humidity-sensor accuracy tolerance, so dependable holding of a selected room humidity is not independently established.
• AEOCKY claims ETL certification, but an exact-product listing could not be matched in the public ETL directory review. This is unverified, not evidence of a safety failure.
• Years two and three are supplemental warranty coverage that may result in prorated compensation, rather than a straightforward repair or replacement commitment.

Who is it for

This product suits someone managing humidity in a normally heated basement, main living area, or a group of connected rooms, especially where a floor drain is available for continuous drainage. It is most practical for buyers who want independently verified energy and moisture-removal figures, rather than relying on the headline maximum. The 40% to 80% setpoint and Auto range can support an EPA-aligned indoor target around 30% to 50%, although a separate hygrometer is useful because sensor accuracy is not published.

Who is it not for

It is not a strong fit for unheated spaces that regularly fall below 50°F, even though the manual lists operation down to 41°F. AEOCKY recommends operation above 50°F for best compressor dehumidification, and low temperatures reduce water removal and can trigger defrost cycles. It is also unsuitable as a medical intervention for asthma or allergies, or for anyone who needs a publicly verifiable exact-model electrical-safety listing before use. Homes with no safe drain route must plan for regular tank emptying and cleaning.

Integrity

Controlling indoor moisture can help limit mold-friendly conditions. EPA guidance generally recommends keeping indoor relative humidity below 60%, ideally between 30% and 50%. This product gives a selectable 40% to 80% target and an Auto range of 45% to 55%, but its humidity-reading accuracy is not stated. Its full-tank shutoff, drain-hose guidance, washable filter, and instructions to clean the tank every one to two weeks are meaningful protections against overflow and stagnant-water buildup. The strongest ecology evidence is its EPA ENERGY STAR record, which independently reports 24.5 pints per day, 1.86 L/kWh, 285 kWh annual energy consumption, and Most Efficient certification. EPA also lists HFC-32 refrigerant with a GWP of 675, lower than many older HFC options but still a climate-warming gas. The manual identifies it as flammable R32 equipment and gives ventilation and ignition-source precautions. No product-specific CPSC recall was located in the public recall review. AEOCKY provides one year of limited coverage plus two years of supplemental coverage, with conditions.

Check Price Back to comparison

#2 - Hot Deal

Max 50 Pint Smart Dehumidifier

Buyer Score 95/100Integrity Score 67/100AEOCKY

Overview

This is a portable compressor dehumidifier with a 0.8-gallon tank, manual emptying, and gravity-drain options through an included hose or garden-hose adapter. It is intended for residential damp spaces such as basements, bathrooms, bedrooms, garages, and RVs. The manufacturer documents a washable filter, full-tank automatic shutoff, two fan speeds, timer, child lock, and selectable humidity control. The manufacturer rates moisture removal at up to 50 pints per day at 95°F and 95% relative humidity, and 38 pints per day at 86°F and 80% relative humidity. Those are not current DOE standardized rating conditions, and no exact-product DOE or ENERGY STAR record was located. Its 3,500-square-foot coverage, 40 dB noise, 59°F low-temperature operation, and precision humidistat claims are manufacturer-stated. The available documentation is inconsistent on some settings, including humidity range, power draw, and low-temperature guidance.

What works

• The manufacturer documents full-tank automatic shutoff, a transparent removable tank, continuous gravity drainage, and a washable filter.
• A selectable humidity setting includes 40% RH, which is within the EPA's generally recommended 30% to 50% indoor range, although accuracy was not independently verified.
• The official support site provides a model-specific manual, a support contact, and a stated three-year coverage program.
• An FCC wireless-emissions test report includes this product among listed models, but it does not verify electrical appliance safety, moisture removal, or efficiency.

What does not

• The 50-pint figure is a maximum result at 95°F and 95% RH, not a current DOE-standardized capacity, and no exact-product DOE or ENERGY STAR listing was located.
• The manufacturer states ETL certification, but an exact-product listing could not be confirmed in an ETL, UL, or CSA public registry during this review.
• Energy use, integrated energy factor, and refrigerant type are not clearly disclosed for this product. The advertised energy-savings estimate therefore cannot be checked.
• Documentation conflicts on humidity adjustment range, rated wattage, and minimum operating temperature. That makes real-world control, power use, and cool-basement expectations less predictable.
• The small 0.8-gallon tank will require frequent emptying in a wet space unless a correctly sloped gravity drain is available.

Who is it for

It suits a homeowner or renter managing a moderately warm, damp room who can use a nearby floor drain, sink, or other safe gravity-drain destination. It is also suited to someone who values a compact tank that can be removed and inspected, and who is willing to clean the washable filter and verify room humidity with a separate hygrometer. The adjustable control can be set to 40% RH, a sensible starting point for moisture control, but the advertised large-area coverage should be treated as a manufacturer estimate rather than a sizing guarantee.

Who is it not for

It is not well suited to an unheated basement, crawl space, or garage that routinely falls below about 59°F, because the product documentation gives inconsistent low-temperature guidance and does not establish dependable low-temperature capacity. It is also a poor fit for buyers who need independently registered safety certification, DOE-standardized water-removal data, verified efficiency figures, or confirmed refrigerant disclosure. Households unable to supervise a gravity hose should avoid relying on continuous drainage, since hose slope, seating, and blockages can create leak risk.

Integrity

Keeping indoor humidity in the EPA-recommended range can help limit moisture conditions that support mold. This product can be set to 40% RH and has a stated automatic defrost function, but no independent evidence was found for humidistat accuracy or for its claimed stable control. A separate hygrometer remains useful. The manual's tank shutoff, removable tank, washable filter, and gravity drain can reduce overflow and stagnant-water concerns when they are regularly cleaned and checked. The manufacturer claims ETL, NRCan, RoHS, and REACH compliance, but this review could not confirm an exact-product North American safety listing in public ETL, UL, or CSA records. No applicable CPSC recall or regulator warning was identified during review. The manufacturer offers one year of limited defect coverage plus two years of supplemental coverage, but later remedies can be prorated compensation and may require evidence or return of the product. Refrigerant and standardized efficiency data were not disclosed for this product, limiting climate-impact and operating-cost assessment.

Check Price Back to comparison

#3

Gasbye Energy Star Dehumidifier 4500 Sq. Ft.

Buyer Score 93/100Integrity Score 85/100Gasbye

Overview

This is a portable compressor dehumidifier for indoor rooms, with a 1.72-gallon bucket, continuous gravity-drain option, washable air filter, wheels, and a 115 V, 500 W electrical rating. The manufacturer documents adjustable 35% to 80% relative-humidity settings in Normal and Turbo modes, plus a display accuracy claim of plus or minus 5% RH. Its most meaningful verified performance figure is 49.7 pints per day under the Energy Star product registry, with an Integrated Energy Factor of 2.01 L/kWh. The prominent 115-pint figure is manufacturer-stated and explicitly tied to hotter, wetter 86°F and 80% RH conditions, not the standard rating condition. The exact product is also listed in UL Solutions records, while the manual identifies R32 refrigerant and a 41°F to 90°F operating range.

What works

• EPA Energy Star independently lists 49.7 pints per day and 2.01 L/kWh for this exact product.
• UL Solutions lists this exact product under an electrical-appliance certification file, supporting North American electrical-safety listing.
• The manufacturer provides detailed bucket, float-sensor, hose, filter, and cleaning instructions, including biweekly bucket cleaning.
• The manual documents 35% to 80% RH settings, auto-defrost indication, a three-minute compressor restart delay, and automatic bucket-full shutoff.
• The manufacturer documents R32 refrigerant, and EPA Energy Star identifies it as lower-GWP HFC-32 with a GWP of 675.

What does not

• The 4,500-square-foot coverage claim has no stated room conditions, moisture load, ceiling height, or air-exchange assumptions.
• The 115-pint headline capacity is not the standardized capacity. It applies at 86°F and 80% RH, while the independently listed capacity is 49.7 pints per day.
• Below 60°F, the manual says the unit may enter defrost frequently and remove less moisture. This limits performance in cold basements.
• The manufacturer claims humidity-display accuracy of plus or minus 5% RH, but no independent accuracy verification was located.
• Warranty support is documented, but a public parts catalog, repair manual, and fixed-price repair pathway were not located.

Who is it for

This product suits a buyer managing persistent humidity in a heated basement, large living area, laundry area, or garage that stays roughly within 41°F to 90°F. It is most practical where a floor drain is available, because the manufacturer documents gravity drainage with the supplied hose and garden-hose adapter. It also fits users willing to clean the bucket every two weeks and rinse the washable filter monthly. A target around 45% to 50% RH is available within its documented control range.

Who is it not for

It is not suited to an unheated, winter-cold basement that regularly stays below 60°F, because the manual warns that defrost cycles may become frequent and reduce moisture removal. It is also a poor fit where there is no safe drainage route and nobody can empty and clean the bucket routinely. Households needing independently confirmed humidity-sensor accuracy, readily published spare-part pricing, or technician-level repair documentation should look for a product with those records. Keep it away from ignition sources because it uses flammable R32 refrigerant.

Integrity

The useful health feature is moisture control, not treatment of mold, asthma, or allergies. The adjustable control range includes the 30% to 50% relative-humidity range commonly used for indoor moisture management, although the product's stated display accuracy is manufacturer-provided. The manual gives practical hygiene measures, including cleaning the bucket every two weeks, keeping the float sensor free-moving, and washing the filter monthly. The exact product has verified Energy Star certification, a 49.7-pint daily certified water-removal capacity, and a 2.01 L/kWh efficiency rating. It uses R32, a lower-GWP refrigerant than many legacy refrigerants, but it is A2L flammable. The manual requires clearance, no shared outlet, and qualified refrigerant service. No exact-product CPSC recall or incident signal was located in the searches performed.

Check Price Back to comparison

#4

AEOCKY 4500 Sq.Ft Dehumidifier with Pump

Buyer Score 89/100Integrity Score 82/100AEOCKY

Overview

This is a portable compressor dehumidifier with a 1.45-gallon collection tank, continuous-drain hose, and a built-in pump intended to send condensate upward to a drain. AEOCKY states that it is for spaces up to 4,500 square feet, removes up to 80 pints per day, and has a 5 m drain hose. Those maximum-capacity and coverage claims do not give the temperature and humidity conditions needed for direct comparison. The product is independently listed by EPA Energy Star under the LEO-001 additional model name. Its standardized capacity is 24.5 pints per day, its integrated energy factor is 1.87 L/kWh, and it held Energy Star Most Efficient 2025 recognition. The official record also identifies HFC-32 refrigerant with a global warming potential of 675. AEOCKY states a 3-year whole-unit warranty and an ETL claim, but an exact-model ETL directory record was not located in this review.

What works

• EPA Energy Star independently links this product to a 24.5-pint-per-day standardized moisture-removal capacity.
• Its 1.87 L/kWh integrated energy factor met Energy Star Most Efficient 2025 criteria for its capacity class.
• The Energy Star record identifies lower-GWP HFC-32 refrigerant, with a stated GWP of 675.
• AEOCKY states that the built-in pump and 5 m hose can route condensate upward, which can reduce routine tank emptying where a suitable drain is available.
• AEOCKY provides a 3-year whole-machine warranty and year-round email support.

What does not

• The widely displayed 80-pint-per-day and 4,500-square-foot claims are maximum claims without stated test conditions, while the independently comparable capacity is 24.5 pints per day.
• No exact-model humidistat accuracy tolerance was found, so the ability to hold a chosen humidity precisely is unverified.
• The manufacturer states ETL certification, but this review did not locate an exact-model record in an issuing-body listing directory.
• Exact-model instructions for pump cleaning, drain fitting maintenance, operating-temperature limits, and frost-control behavior were not available from the manufacturer during this review.

Who is it for

It suits a homeowner managing persistent dampness in a bedroom, basement, bathroom, or other enclosed residential area who has a safe route to a drain above or away from the unit. The built-in pump is particularly relevant where gravity drainage is impractical. It also fits users who want independently documented efficiency and capacity rather than relying only on a maximum pints claim. Set the target humidity within the EPA-preferred 30 to 50 percent range, then verify room humidity with a separate hygrometer because published sensor accuracy is unavailable.

Who is it not for

It is not well suited to buyers who need a verified 80-pint daily capacity under current standardized testing, or who are sizing strictly from a 4,500-square-foot marketing claim. The official standardized rating is 24.5 pints per day, and moisture load depends heavily on leaks, temperature, ventilation, and starting humidity. It is also not the right choice for unattended or critical installations where independently confirmed electrical listing, exact pump-maintenance instructions, low-temperature operating limits, and humidity-sensor accuracy are required before installation.

Integrity

Controlling excess indoor moisture can help limit conditions favorable to mold. EPA guidance advises keeping indoor relative humidity below 60 percent, ideally 30 to 50 percent. This product can be set up for automatic moisture control, but its exact humidity-sensor accuracy was not published, so a separate hygrometer is sensible for health-sensitive rooms. The pump may reduce overflow risk from missed tank emptying, but the hose connection and drainage route still need routine inspection and cleaning. The strongest environmental evidence is the exact product's Energy Star record. It documents 24.5 pints per day under standardized testing, 1.87 L/kWh integrated energy factor, and Energy Star Most Efficient 2025 recognition. Its HFC-32 refrigerant has a stated GWP of 675, lower than older high-GWP refrigerants but still a climate pollutant if leaked. AEOCKY states a 3-year warranty, although detailed repair documentation and an exact safety-listing registry record were not confirmed.

Check Price Back to comparison

#5

VEAGASO 30 Pint Dehumidifier with Drain Hose

Buyer Score 87/100Integrity Score 64/100VEAGASO

Overview

This is a portable compressor dehumidifier with a removable 2 L tank and a supplied gravity-drain hose. It has two fan speeds, three operating modes, a 1 to 24 hour timer, a washable air filter, and user-adjustable humidity control from 30% to 80% RH in 5% steps. That range includes the EPA's preferred 30% to 50% indoor humidity range, although no humidity-sensor accuracy specification or independent control test was found. Its most consequential specification is conditional. The manual reports 8.5 pints per day at 65 F and 60% RH, but the advertised 34-pint figure is measured at 95 F and 90% RH. The manufacturer also claims Energy Star certification, but an exact product listing was not located in the EPA registry. The manual identifies 45 g of flammable R290 refrigerant and states a 41 F to 95 F operating range.

What works

• Humidity can be set from 30% to 80% RH, including the EPA's preferred 30% to 50% range, according to the manual.
• The manual documents full-tank shutoff, a removable tank, continuous gravity drainage, and a washable filter that can be vacuumed or washed with mild detergent.
• Cool-space limits are stated rather than implied. The manual specifies 41 F to 95 F operation, automatic defrosting, and return to dehumidification after defrosting.
• The manufacturer provides a 1-year warranty plus 2 additional years after registration, along with a support contact and cleaning instructions.

What does not

• The 34-pint headline is a maximum-condition result at 95 F and 90% RH. The manual's 65 F and 60% RH figure is 8.5 pints per day, so the headline is not a comparable current DOE-condition capacity.
• The manufacturer calls the product Energy Star certified, but no matching exact-model certification was found in the EPA Energy Star registry. Its stated 1.30 L/kWh efficiency figure is manufacturer-provided, not registry-confirmed.
• No exact-model UL, ETL, or CSA listing was located. That is missing independent electrical-safety evidence, not evidence of a recall or confirmed defect.
• The product uses flammable R290 refrigerant. Its manual requires qualified personnel for refrigerant-circuit repair and adequate ventilation during service.
• Humidity accuracy, noise test conditions, and the basis for the 2,500 square foot coverage claim are not specified. The manufacturer's listed dimensions also differ from the catalog dimensions.

Who is it for

This product suits someone managing mild to moderate dampness in a finished room, bathroom, bedroom, or basement that remains above 41 F and has a suitable low drain for gravity drainage. It is especially practical for a user who can inspect the tank and hose, clean the washable filter about every two weeks, and use the humidistat around 40% to 50% RH. The small 2 L tank makes continuous drainage more useful where unattended operation is needed.

Who is it not for

It is not well suited to a cold basement, garage, crawlspace, or other area that can fall below 41 F, because the manual says the product is not suitable for that range and will protectively stop. It is also not suitable where there is no safe gravity-drain route and regular tank emptying is impractical. Buyers requiring independently verified Energy Star efficiency, certified electrical safety documentation, or a DOE-comparable 34-pint capacity should use a product with those exact-model records.

Integrity

Keeping indoor humidity around 30% to 50% can help limit moisture conditions that support mold, and the control range on this product includes that target. Its full-tank stop, removable reservoir, drain option, and washable filter can reduce overflow and maintenance problems when the tank, hose, and filter are cleaned as directed. A dehumidifier does not repair a water intrusion source or remove existing mold, so leaks and wet materials still need prompt correction. The manual identifies 45 g of R290, or propane, refrigerant. R290 has very low climate impact compared with many older refrigerants, but it is flammable. The manual therefore limits refrigerant-circuit work to trained personnel and calls for ventilation during service. No exact-model Energy Star record or UL, ETL, or CSA safety listing was located during verification. No exact-model CPSC recall was found, but the lack of a listing should not be interpreted as independent safety certification.

Check Price Back to comparison

#6

DECIUU Max 100 Pint Dehumidifier

Buyer Score 84/100Integrity Score 73/100DECIUU

Overview

This is a portable, compressor-based residential dehumidifier with a 1.45-gallon collection tank, casters, a washable pre-filter, and a gravity drain-hose connection. Its manual describes adjustable humidity settings from 35% to 80%, three fan speeds, full-tank shutoff, automatic defrost, and automatic restart after a power interruption. The independently registered product is a 32-pint-per-day portable dehumidifier, with an integrated energy factor of 2.13 L/kWh and estimated annual energy use of 334 kWh. It is ENERGY STAR certified for the United States and Canada. However, the product page and manual also describe it as 70 pints per day under a different condition and 100 pints per day at an unstated non-DOE maximum condition, and claim ENERGY STAR Most Efficient 2024. The current ENERGY STAR record does not support that Most Efficient designation.

What works

• Exact product is independently listed as ENERGY STAR certified, with a 32-pint-per-day standardized capacity and 2.13 L/kWh integrated energy factor.
• The documented 35% to 80% setpoint range includes the EPA's commonly recommended 30% to 50% indoor humidity range, although sensor accuracy is not published.
• The manual documents full-tank shutdown, a visible tank status indicator, gravity drainage, and specific tank and filter cleaning intervals.
• A 41 F to 95 F operating range, automatic defrost, compressor delay protection, and auto restart are documented in the manual.

What does not

• The 70-pint and 100-pint marketing claims conflict with the exact product's independently registered 32-pint standardized capacity.
• The claimed ENERGY STAR Most Efficient 2024 status is not supported by the current ENERGY STAR registry, which lists this product as certified but not Most Efficient.
• No exact-model UL, ETL, or CSA electrical-safety listing was located in the searched public certification directories. ENERGY STAR certification is not a substitute for an electrical-safety listing.
• No published humidity-sensor accuracy, sound level, or detailed replacement-parts catalog was found. The manual also says the appliance is not intended to be serviced.

Who is it for

This product fits a buyer managing moderate moisture in an enclosed, conditioned basement, laundry area, garage, or similar space that stays at least 41 F. It is best suited to someone who will use the independently documented 32-pint standardized capacity for planning, set the humidistat around 40% to 50%, clean the tank and pre-filter every one to two weeks, and can route a gravity drain hose downward to a suitable floor drain. The two-year coverage requires registration within 30 days.

Who is it not for

It is not suited to buyers who need a verified 70-pint or 100-pint-per-day machine, or who are sizing equipment for a genuinely 5,000-square-foot moisture load. Those claims are not supported by the exact product's ENERGY STAR record. It is also not appropriate for spaces routinely below 41 F, unheated freezing conditions, or drainage routes that cannot maintain a downhill slope. Buyers who require a publicly verifiable UL, ETL, or CSA listing, published noise data, repair manuals, or readily available replacement parts need more documentation.

Integrity

Humidity control can help manage moisture conditions associated with mold. EPA guidance advises keeping indoor relative humidity below 60%, ideally between 30% and 50%. This product's documented 35% to 80% manual setpoint and 45% to 55% automatic mode can reach much of that target range, but no humidity-sensor accuracy tolerance was published. A separate hygrometer is useful for checking actual room conditions. The exact product has an independently verified ENERGY STAR certification, 32-pint standardized capacity, 2.13 L/kWh integrated energy factor, and HFC-32 refrigerant with a listed GWP of 675. HFC-32 is EPA-acceptable for residential dehumidifiers subject to use conditions, but it is flammable, and the manual carries fire and ventilation precautions. No exact-model CPSC recall was located in the searched records. The manual documents a one-year limited warranty, extended to two years with timely registration, but provides limited evidence of repair parts or service support.

Check Price Back to comparison

#7

hOmeLabs 3000 Sq. Ft. Dehumidifier - 35 Pint

Buyer Score 83/100Integrity Score 81/100hOmeLabs

Overview

This is a portable, compressor-based dehumidifier with a bucket, a gravity-drain outlet, two fan speeds, caster wheels, and a user-set humidity range of 35% to 85%. The manufacturer manual states a room-humidity display accuracy of ±5%, automatic shutoff when the bucket is full or the target is reached, automatic defrost, and operation from 41°F to 90°F. Its moisture-removal figure is independently traceable. EPA ENERGY STAR records list 35.02 pints per day under the DOE Appendix X1 test method and an integrated energy factor of 1.9 L/kWh. The exact product also appears in UL Solutions' certification database. The seller's 4,500-square-foot coverage claim is not tied to room conditions, airflow, insulation, or a moisture-load calculation, so it should not be treated as a standardized capacity measure.

What works

• EPA ENERGY STAR records independently report 35.02 pints per day under the current-style DOE Appendix X1 capacity method.
• The exact product appears in UL Solutions' certification database, supporting independent North American electrical-safety listing.
• Manufacturer-stated controls cover the EPA's generally recommended 30% to 50% indoor humidity range, with 35% to 85% settings and a stated ±5% display accuracy.
• The manual documents bucket-full shutoff, a full-bucket indicator, gravity drainage, auto-defrost, and clear bucket and filter cleaning intervals.

What does not

• The 4,500-square-foot coverage claim gives no test conditions or moisture-load assumptions, so it is not a dependable sizing figure.
• The available exact-product manual does not document the advertised Wi-Fi functions, noise level, or a reproducible sound measurement.
• The unit is specified only for 41°F to 90°F operation. It has auto-defrost, but it is not documented for colder basements or unheated spaces.
• The warranty is limited to one year, third-party repairs can void it, and readily available replacement parts documentation was not found.
• Neither the available manual nor the ENERGY STAR record identifies the refrigerant or its global-warming potential.

Who is it for

This product fits a household that needs a portable, independently documented 35-pint-per-day unit for a finished basement, living area, or other damp space that normally remains above 41°F. It is most suitable where a floor drain is available or where someone can empty and wash the bucket regularly. A user who can set a target around 40% to 50% humidity and periodically clean the washable air filter can use its documented controls and maintenance features effectively.

Who is it not for

It is not well suited to an unheated cellar, garage, crawlspace, or other space that can fall below 41°F, because the manual does not support operation there even though it has auto-defrost. It is also a weak fit for buyers who need a documented low-noise rating, verified Wi-Fi behavior, a built-in condensate pump, or long-term repair access. Households with active water intrusion, standing water, or existing mold need the moisture source corrected, not only a portable appliance.

Integrity

Keeping indoor humidity around 30% to 50% can help limit moisture conditions that support mold, according to EPA guidance. This product can be set within that range, but its stated display accuracy is ±5%, so an independent hygrometer is useful when close control matters. It is not a treatment for allergy or asthma, and it cannot correct leaks, flooding, or mold already present. The bucket should be cleaned every two weeks and the filter at least monthly, as the manual directs. The product has independently documented ENERGY STAR certification, 35.02-pint standardized capacity, 1.9 L/kWh integrated energy factor, and UL listing. Its listed efficiency is verifiable, although it does not meet the higher 2025 ENERGY STAR threshold for a newly certified 25 to 50 pint portable unit. No exact-product recall was identified in the CPSC dehumidifier recall material reviewed. Refrigerant type and climate impact remain undisclosed, and repair support is limited by a one-year warranty and lack of published parts information.

Check Price Back to comparison

#8

SEMKAP 2500 Sq.Ft Dehumidifier with Drain Hose

Buyer Score 80/100Integrity Score 69/100SEMKAP

Overview

This is a compact, portable compressor dehumidifier for indoor rooms. The listed dimensions are 6.7 by 11.4 by 16.3 inches, with a 2.5-liter removable tank, 120-volt power, a stated 130-watt draw, a washable filter, and a hose option for gravity drainage. It is marketed for basements, bathrooms, bedrooms, and other damp household spaces. The product is stated to remove up to 14.7 liters per day at 95 F and 90% relative humidity, which is about 31 pints per day. That is a manufacturer claim under warm, very humid conditions, not a verified current DOE capacity rating. The listing also states automatic defrost, a full-tank stop, adjustable humidity control, and a 24-hour timer. No exact-product Energy Star, DOE efficiency, UL, ETL, or CSA registry record was located in this assessment.

What works

• The stated 2.5-liter removable tank, water-level indicator, and automatic full-tank stop provide basic overflow protection.
• Continuous gravity drainage is stated, which can reduce manual emptying when the hose is correctly routed to a drain.
• A washable filter and removable tank are stated, giving the user accessible parts that need regular cleaning.
• The stated humidity target of 40% to 60% is broadly useful for damp-room management, although sensor accuracy was not independently verified.

What does not

• The stated 32-pint daily removal figure is not tied to the current DOE 65 F and 60% RH test condition, so it is not directly comparable with standardized ratings.
• No exact-product listing was found in the Energy Star product finder or an independent electrical-safety registry reviewed for this assessment.
• The product's 2,500-square-foot coverage statement gives no moisture-load, ceiling-height, air-leakage, or temperature conditions, so it should not be treated as a guaranteed room-size rating.
• No exact-model operating-temperature range, refrigerant identity, warranty terms, parts catalog, or repair documentation was located.
• The 2.5-liter tank is small compared with the stated daily moisture removal, so tank-only use can require frequent emptying in wet conditions.

Who is it for

This product suits a household user managing a moderately damp enclosed room who can place it level, keep clearance around the air inlets and outlet, and either empty a small tank often or route a gravity hose safely to a suitable floor drain. Its stated adjustable humidistat, timer, filter access, and automatic defrost are practical for a bedroom, bathroom, laundry area, or finished basement that remains within normal indoor temperatures. An independent hygrometer is useful because humidity-sensor accuracy was not published.

Who is it not for

It is not well documented for a cold basement, crawlspace, or garage where temperatures may approach or fall below normal indoor conditions, because an exact-model operating range was not verified. It is also unsuitable for buyers who require independently registered electrical safety certification, verified energy use, a DOE-comparable capacity rating, or a clearly identified refrigerant before installation. Homes with active water intrusion, flooding, or visible mold need the moisture source corrected rather than relying on a portable unit alone.

Integrity

Keeping indoor relative humidity in the EPA-recommended 30% to 50% range can help limit dampness and mold conditions. This product is stated to offer adjustable humidity control and to target 40% to 60%, but its accuracy and cycling performance have not been independently confirmed. Set it with a separate hygrometer where possible, avoid running it continuously once the room is dry, and clean the tank and washable filter regularly to limit stagnant-water and dust buildup. No exact-product recall or safety warning was located in the CPSC materials reviewed. That is not the same as independent electrical certification. No exact-product Energy Star record, integrated energy factor, DOE certification record, or refrigerant disclosure was found. The product uses a plastic enclosure and has no published repair parts or warranty documentation located in this assessment, which limits confidence about service life and end-of-life support.

Check Price Back to comparison

#9

Vellgoo Max 64 Pint Dehumidifier

Buyer Score 79/100Integrity Score 78/100Vellgoo

Overview

This is a portable, compressor-based residential dehumidifier with a 5.5 L bucket, washable filter, three fan speeds, and either bucket collection or gravity-drain hose use. The manufacturer documentation describes a 40 to 80% RH setpoint range, a 45 to 55% Comfort mode, automatic bucket shutoff, auto-defrost, and restart after a power interruption. Its most important independently confirmed figure is not the listing's 64-pint claim. EPA ENERGY STAR records covering this exact product identify 24.5 pints per day under the current standardized test, 1.87 L/kWh efficiency, 286 kWh annual energy use, and Most Efficient recognition. An older exact-product manual instead gives 52 pints per day at 86°F and 80% RH. Those different conditions explain part, but not all, of the listing's unclear capacity presentation.

What works

• EPA ENERGY STAR independently lists this exact product as certified and Most Efficient, with a 1.87 L/kWh integrated energy factor.
• The exact product is independently listed at 24.5 pints per day under the current standardized capacity test, allowing meaningful capacity comparison.
• Manufacturer documentation describes a 45 to 55% Comfort mode and 40 to 80% manual setpoints, which include the commonly recommended indoor humidity range.
• The documented bucket-full shutoff, continuous gravity drainage option, washable filter, and instructions to empty and dry the tank support routine moisture and hygiene management.
• EPA ENERGY STAR identifies lower-GWP HFC-32 refrigerant, with a stated GWP of 675.

What does not

• The 64-pint listing claim conflicts with the independently listed 24.5-pint standardized capacity. The manual's 52-pint figure uses hotter, much wetter conditions, so the retail claim is not presented comparably.
• The manual asserts ETL and RoHS certification, but an exact-product listing in the public ETL directory was not confirmed in this review. ENERGY STAR is not an electrical-safety certification.
• No stated humidistat accuracy, noise measurement, or published tolerance was found. The controls are documented, but their precision and real-room noise remain unproven.
• The stated 41 to 95°F operating range and auto-defrost are useful, but this is not a low-temperature unit for spaces that can fall near freezing.
• Warranty coverage is one year, or two years only after timely registration. No exact-product parts catalog or repair manual was located.

Who is it for

It suits a homeowner managing a damp but heated basement, laundry area, garage, or other indoor space that stays roughly above 41°F. It is particularly relevant for someone who can route a gravity hose downhill to a drain, or who is willing to empty and clean a 5.5 L bucket. The verified 24.5-pint standardized capacity and strong ENERGY STAR efficiency make it appropriate when predictable test-based capacity and lower operating electricity use matter more than a large retail coverage number.

Who is it not for

It is not suited to an unheated crawlspace, seasonal cabin, or garage that can approach freezing, because the documented lower operating limit is 41°F even though it has auto-defrost. It is also not appropriate where water must be pumped upward, since the documentation reviewed supports bucket and gravity drainage, not a built-in pump. Households requiring verified electrical listing details, measured low noise, highly accurate humidity sensing, or accessible replacement parts should seek documentation that supplies those exact records.

Integrity

Keeping indoor humidity in a moderate range can help limit moisture conditions associated with mold. This product's documented 40 to 80% controls and 45 to 55% Comfort mode can target that range, but no humidistat accuracy figure was found. Bucket-full shutoff and continuous drainage can reduce overflow risk if the hose is correctly sloped. The tank still needs routine emptying, cleaning, and drying, and the washable filter needs regular cleaning. The strongest environmental evidence is EPA ENERGY STAR verification. The exact product is listed as ENERGY STAR Most Efficient at 1.87 L/kWh, with annual energy use of 286 kWh. EPA also identifies HFC-32 refrigerant with a GWP of 675, lower than many older HFC choices but still a climate-warming refrigerant if released. No exact-product CPSC recall was found in the review, but public confirmation of the manual's claimed ETL listing was not located.

Check Price Back to comparison

#10

KNKA 2500 Sq.Ft Dehumidifier with Drain Hose

Buyer Score 76/100Integrity Score 70/100KNKA

Overview

This is a portable compressor dehumidifier with a 3 L removable tank, a supplied gravity-drain hose, washable filter, two fan speeds, wheels, and DEHU, DRY, and continuous modes. The manufacturer states a 34-pint daily maximum, 230 W input, automatic defrost, full-tank shutoff, child lock, and a selectable humidity range of 30% to 80%. Its stated 34-pint figure is tied to 95 F and 90% relative humidity in the available model documentation, not the current U.S. comparison condition of 65 F and 60% RH. The stated 2,500 square foot coverage is also not dependable as presented. KNKA's own support page says the PD22sc is designed for up to 40 m², about 430 square feet. No exact-model listing was located in the searched ENERGY STAR, UL, ETL, CSA, or DOE public registries.

What works

• The stated 30% to 80% control range includes EPA's preferred 30% to 50% indoor humidity range.
• A removable 3 L tank, automatic full-tank shutoff, washable filter, and included gravity-drain hose provide practical water-management options, manufacturer-stated.
• Automatic defrost is documented, which is a useful feature for damp basement use, although the supported temperature range is not published.
• The manufacturer provides product support contact options and identifies this model in its support materials.

What does not

• The 34-pint removal claim is stated at 95 F and 90% RH, so it is not a comparable current DOE capacity rating for a cool basement.
• KNKA's own sources conflict sharply on coverage, stating both 2,500 square feet and about 430 square feet for the same PD22sc line.
• No exact-model ENERGY STAR, DOE compliance, UL, ETL, or CSA registry record was located in the searched public databases.
• No refrigerant type, refrigerant charge, humidity-sensor accuracy tolerance, operating-temperature range, or independently measured noise level was found in the available product documentation.
• The accessible warranty language is general and refers buyers to product documentation, without clear public repair parts or service-manual support.

Who is it for

This product suits a renter or homeowner managing moisture in one enclosed small room, bedroom, bathroom, laundry area, or modest basement zone, where there is a nearby grounded outlet and a safe floor drain or willingness to empty a 3 L tank. It is most appropriate for someone who can use an independent hygrometer, set the unit near 40% to 50% RH, keep airflow clear, and treat the stated capacity and room-size figures as manufacturer claims rather than standardized performance data.

Who is it not for

It is not suited to buyers who need verified capacity, energy-use data, refrigerant disclosure, or independently confirmed electrical safety listing for insurance, workplace, nursery, or property-management requirements. It is also a poor fit for a large 2,500 square foot open basement based solely on the advertising, since the brand's support page instead describes about 430 square feet. Do not rely on it alone where active flooding, a plumbing leak, standing water, visible mold, or persistent building moisture requires source repair or professional remediation.

Integrity

Controlling moisture can help limit condensation and mold conditions when indoor relative humidity is kept below 60%, ideally around 30% to 50%. This product's stated adjustable range can reach that target, but no humidity-sensor accuracy specification or independent control test was found. Use a separate hygrometer, inspect the tank and drain connection regularly, clean the washable filter, and keep the drain route unobstructed. A dehumidifier does not repair a leak or remove established mold. No exact-model recall or regulatory warning was located in the searched U.S. consumer-safety records. That is not the same as independent safety certification. No exact-model public listing was found in searched UL, ETL, CSA, ENERGY STAR, or DOE records. The refrigerant and efficiency metric are not disclosed in the available documentation, preventing a meaningful assessment of refrigerant climate impact or water removed per kilowatt-hour. The manufacturer describes a limited warranty, but public repair-parts and service documentation are not clearly available.

Check Price Back to comparison